With more than 20 years of clinical history, the femoral implant consists of three elements:
The SMR stem allows customized reconstructions thanks to the wide range of modular combinations of proximal and distal components.
Titanium alloy Ti 6Al 4V ELI, which guarantees excellent biocompatibility and mechanical resistance. The surface finish is obtained by abrasion with corundum granules that increase the contact surface and facilitate prosthesis-bone anchoring.
The modular proximal component solves the problems of restoring the physiological limb length and the stability of the joint thanks to the four lengths of 40, 50, 60 and 70 mm and the two CCD angles of 125° and 135°.
The mirror polishing in the neck area has been designed to reduce the wear of the polyethylene in contact with the neck during flexion. The mirror finish also eliminates the risk fatigue cracking.
The distal component is conical with longitudinal fins. This prosthetic design guarantees axial stability and resistance to torsional forces at the same time.
Modularity is ensured by four lengths (100, 160, 200 and 240 mm) and nine diameters (14, 15, 16, 17, 18, 19, 20, 22 and 24 mm);
The 200 and 240 mm distal components have an anatomical procurvation of 3° to avoid the tip effect on the cortical area;
Three holes are positioned radially at 120° in the distal portion to allow the possible use of cortex screws in the rare cases where they are needed (4).
The distal component of the SMR Revision Stem is also used in conjunction with the proximal component of the SMR Resection Modular Stem. The surgeon therefore has the option of using cemented or uncemented distal components for both SMR and SMR Resection prostheses, with different indications.
The Professionals section is intended for medical professionals or healthcare professionals only
GRUPPO BIOIMPIANTI s.r.l. – Via Liguria 28, 20068 Peschiera Borromeo (Milan) – Italy
P.IVA: 10617240154, DUNS 443386602